Glass Shelf Installation; Cabinet Lock Operation; Tipping Restraint Hardware Installation - Twin Star CW-52ACT-TS Manual De Instrucciones Adjunto

Wall Stud
Cabinet
Wall
E-10

Glass Shelf Installation:

Remove Shelf Pin from bag. Choose desired
height of Shelf and place the four Shelf Pin
into same height shelf holes inside side Panels.
Insert Glass Shelf, allow Glass Shelf to rest on
the Shelf Pin.

Cabinet Lock Operation:

Shelf
Two keys (one duplicate) are provided in order
Pin
to operate the lock mechanism on your wine
cabinet. You may locate these inside the wine
cooler as you unpack your cabinet Turn the
key counter clockwise to lock the cabinet and
clockwise to unlock your cabinet. Avoid
pulling on the cabinet door while it is in the
locked position to prevent damage to the lock
mechanism and/or door frame.
Warning: To help prevent child
entrapment keep key out of reach of
children and away from the cabinet.
Note:There are levelers located under the cabinet feet,
height can be increased by twisting
counter-clockwise.
Tipping Restraint Hardware:
Hardware devices for this cabinet. You must
install this hardware to prevent accidents or
injuries. When properly installed, this restraint
can provide protection against the unexpected
tipping of the cabinet due to small tremors,
bumps or climbing. We strongly recommend
mounting this hardware to a wall stud and
your cabinet.
Warning: You must install the Tipping
Restraint Hardware to help
prevent any accidents or damage
to the unit.
Twin-Star International, Inc.
Delray Beach, FL 33445
In English: 1-866-661-1218
In French: 1-866-661-1219
In Spanish: 1-866-661-1219
Cabinet Model# EC1066LC24
Made in China
Printed in China
© 2012, Twin-Star International, Inc.