4. O
PERATION
This product is not designed for continual use. Make sure there are regular breaks during operation
to maximize the life of your laser. Always disconnect the Scorpion™ Script from power when not in
use.
Access the four different operating modes available in this product by using the <MODE> button on
Manual
the front panel. Pressing and holding the <MODE> button for 2.5 seconds will turn the product on or
Mode
off. Press <MODE> to cycle through the modes. Please see a description of each mode below.
Mode
Auto
Sound
Text
Time
Press and hold <MODE> to turn off the Scorpion™ Script. Press <MODE> again to turn it back on.
The laser output size can be adjusted to fit whatever size venue you may have. This adjustment
Laser
should be made while the laser is on, to adequately adjust the size to your needs.
Output
Use a small phillips screwdriver (size #00) to adjust the size of the output, either larger or smaller.
Insert screwdriver into hole located on rear of product, and turn gently clockwise or counter-
clockwise.
Scorpion™ Script User Manual Rev. 3
Description
Built-in auto programs
User created auto programs
Sound-active mode
Text mode
Time mode
Mode
Button
LED Indicator Status
Blink red
Red
Blue, and will blink to the beat of
detected sounds
Purple and blue
Blink purple (red and blue)
Page 15 of 64