QSC SR-110 Manual De Uso página 2

Connections
The SR-110 has barrier strip screw terminals that accept up to #10 AWG stranded loudspeaker wire.
Connect the amplifier's output signal to the loudspeaker's INPUT terminals. Observe proper polarity; amplifier + signal to loudspeaker +
INPUT, amplifier - signal to loudspeaker - INPUT. Use the largest wire size and shortest length for the application.
NOTE! Maintain proper loudspeaker connection polarity throughout the entire system for maximum performance.
Parallel Connected OUTPUT Terminals
The SR-110 also has two terminals marked OUTPUT. These terminals are connected in parallel to the INPUT terminals and can be used
for connecting multiple SR-110 enclosures in parallel with one another. Connect the OUTPUT terminals to the next loudspeaker's INPUT
terminals. Observe proper polarity of connections.
NOTE! Ensure that the amplifier driving the parallel loudspeakers is rated to drive the lower impedance (Example:
EN
4 enclosures in parallel will yield 2 ohms impedance, nominally).
2