Intellinet Network Solutions GUESTGATE MK II Guía De Instalación Rápida página 4

Installation
This setup method assumes that a DHCP Server, such as a router, is present in
your network.
1. Connection to the Host Network
Connect standard RJ45 Network Cable to GuestGate's HOST Port and to an
RJ45 port on your existing network (Ethernet switch port, Router switch port,
etc.).
Turn on GuestGate and verify that the network connection is active (HOST LED
must be lit on GuestGate).
NOTE: The startup process takes up to 60 seconds.
2. Connection of Guests
Using standard RJ45 Network Cable you can connect PCs, Notebooks, Ethernet
Switches, Hubs or Wireless Access Points to the Guest Ports of GuestGate. Each
Port has its own Status LED. Verify that the network connection is active on
each port you connect.
Alternatively you can connect to GuestGate wirelessly by connecting to the
Wireless network with the name of "GuestGate."
Reset button.
Hold down
for 10
seconds to
restore the
factory
default
settings
Radio on/off
switch
enables or
disables the
wireless
function
Guest ports 1 – 4 for the
connection of LAN switches,
Access Points, Desktop PCs
and Notebook computers
- 4 -
Host port -
Connect this to
your network,
e.g., the router
12V DC power
input connector