Cleaning And Maintenance - Imetec F2015 Instrucciones De Uso

• If you wish to switch your throw back on again, press the timer button (6)
again.
EN MEMORY FUNCTION
After using your throw for a few minutes, the control unit will remember your
last temperature setting.
AUTO SHUT-OFF FUNCTION
Your throw has an AUTOMATIC SHUT OFF TIMER.
After being switched on, the control automatically sets the auto-off timer at 1
hour and LED 1 lights up (10). To change the auto-off time setting, press the
timer selector button (6) and select the time setting required.
When the set time period has elapsed, the throw will automatically switch
off and the standby light will be illuminated in blue on the standby display
(9). If you wish to switch your throw back on again, press the timer button (6)
selecting either 1 or 9 hours.
DISCONNECTION
• To disconnect your throw, switch the control to OFF position 'O' on the
back of your control unit (11).
Your throw is suitable for washing. Check the washing instructions on the
label of your throw to wash it correctly.
WARNING! Always disconnect the appliance from the mains
and disconnect the control connector from the throw before
cleaning or performing maintenance.
BEFORE WASHING OR STORING YOUR THROW:
• Disconnect the control unit from the mains socket (3).
• Disconnect the connector (2) from the throw by pressing the push buttons at
the sides of the control connector (1).
MACHINE WASHING
• The throw can be machine washed at 40°C on a wool programme.
• Only the gentle spin cycle is to be used. DO NOT use an extra spin cycle.
17

CLEANING AND MAINTENANCE