SwITCHING THE APPLIANCE ON AND SELECTING THE TEMPERATURE
• Press the ON/OFF (4) selector to switch the heating pad on.
• The temperature is automatically set to level 5 and indicating this on the temperature display (1).
• Select the desired temperature (from 1 to 5) by pressing the temperature selector (3) until the
relative number lights up on the temperature display (1).
• For continuous operation only select the temperature levels from 1 (min) to 3 (max).
AUTOMATIC SHUTDOwN
• The heating pad is provided with an automatic switch-off system. The stand-by display (2) lights up
after 3 operating hours to indicate that the product has switched off automatically.
• Switch the appliance back on by pressing the ON/OFF selector (4) and select the desired
temperature once again.
SwITCH-OFF
• Switch the heating pad off by pressing the ON/OFF selector (4) when it is no longer used.
• Remove the plug from the socket.
The heating pad is washable. Refer to the washing symbols on the heating pad label for the washing
instructions.
ATTENTION! Always pull the plug out of the electric power
socket before cleaning or maintenance
BEFORE wASHING
• Disconnect the power cable from the socket.
• Disconnect the plug (6) from the socket (5).
MACHINE wASHING
• The heating pad can be machine washed at 30°C with a normal cycle.
• Use the gentle spin cycle only. DO NOT run an additional spin cycle.
DRYING
• Dry in the dryer with a delicate cycle.
• Do not use the heating pad before it is completely dry.
AIR DRYING
• Lay the heating pad flat on a clothes horse until completely dry.
ATTENTION! Do not apply pegs on the heating pad in order
not to damage it.
Store this appliance as follows when not used:
• Wait for the heating pad to be completely dry if previously washed.
• It is recommended to place the heating pad in the package provided upon purchase for better storage.
• Store the heating pad in a dry place.
CLEANING AND MAINTENANCE
STORING THE HEATING PAD
.
EN
13