General Information; Package Contents; Mmf-2 Installation - WEG MMF-02 Guía De Instalación, Configuración Y Operación

1 GENERAL INFORMATION

This guide instructs the installation of the accessory module MMF-02. This module
allows the copy of inverter configurations and SoftPLC program between CFW70X
inverters on the same series, for example: it is only possible to copy data from one
CFW700 to another CFW700 and not from a CFW700 to a CFW701 and vice-versa.
ATTENTION!
Remove power before inserting or removing the module.
ATTENTION!
Check the firmware version of your product before using the module.
The use of any option other than parameter copy to/from the frequency
inverter on versions from 1.0x to 1.2x will imply in incorrect behavior and
may lead to permanent damage of the frequency inverter.

2 PACKAGE CONTENTS

Accessory module in anti-static bag.
„
Installation guide.
„

3 MMF-2 INSTALLATION

Figure 1: MMF-02 installation
Memory Module MMF-02
CFW70X | 5