Residual Hazards - Lenze L-force Drives EZS3 Instrucciones Para El Montaje Y Uso

2.2

Residual hazards

{
Danger!
Dangerous voltage
All power connections carry dangerous voltages both if the motor is
at standstill and after up to 3 minutes after mains switch off.
Possible consequences:
ƒ
Protective measures:
ƒ
ƒ
(
Stop!
Heavy device weight
The device is very heavy and must be lifted for the mounting.
Possible consequences:
ƒ
ƒ
Protective measures:
ƒ
ƒ
ƒ
EDKZS3YA200 DE/EN/FR/ES/IT 3.0
Death or severe injuries after touching the power connections.
Wait for at least 3 minutes before working on the power
connections.
Check whether all power connections are de−energised.
Injury to persons, particularly backache when lifting and holding
the device, respectively
Injury to persons and damage to material assets due to the
device falling down
The device must only be carried with a load bearing system such
as an indoor crane permitted for the device weight
Before the transport, the hoist, the load bearing system and
lifting accessories must be checked for sufficient payload and
faultless status
Do not remove the hoist and the lifting accessories until the
device lies safe on a stable surface or is finally mounted.
l
Safety instructions
Residual hazards
2
27