Devon & Devon Iside 5 Instrucciones De Montaje página 36

OPERATION
In order to switch between COMFORT mode and STAND-BY
mode, press the button (1) briefly.
To ACTIVATE THE BOOST MODE, press the button (1) for about 3
seconds in Comfort mode.
To STOP THE BOOST MODE, press the button (1) briefly. The
temperature controller switches back to Comfort mode
The control recognizes any malfunction to the internal circuits.
In this case the relay switches off immediately and power to the
heating element is not supplied.
PILOT LAMPS
BACKLIGHTING - BUTTON 1
STATE
LIT UP - RED
LIT UP - BLUE
NOT LIT
FLASHING RED
LED BOOSTER - BUTTON 2
STATE
FLASHING RED
(PAG. 32)
Heating element ON
Heating element OFF
STAND-BY MODE is ACTIVE
• Error message;
• Heating element OFF;
• Contact the supplier;
(PAG. 32)
• BOOST FUNCTION active;
• The heating element is switched
on for 120min (max 32
temperature is allowed).
35
MEANING
MEANING
°
C ambient
E
N
G