Timer Setting; Temperature Setting; Automatic Shut-Off Protection - Haverhill HHE1500M1 Manual De Uso Y Cuidado

5� When the heater is active, pressing the TEMP button will start the temperature mode. Use the +
and – buttons to adjust the temperature setting using 1°F increments.
6� An audible beep will sound when pressing the buttons on the remote control to confirm suc-
cessful activation of the feature.
7� The remote control is programmed to work for this heater and model only� Make sure the
distance between the heater and the remote control is less than 16.4 feet (5m), and the angle is
less than 45°.

Timer Setting

1� The heater utilizes a 24-hour timer and can be programmed using 1-hour increments.
2� Use the + and – buttons to adjust the timer.
3� Pressing the MODE button will display the remaining time.
4� The heater will automatically turn the power to OFF when the time expires.

Temperature Setting

1� Pressing the MODE button will switch from the timer setting to the temperature setting.
2� The temperature can be adjusted from 59°F to 95°F and can be programmed using 1°F increments.
3� During operation, if the room temperature is higher than the setting temperature, the heater
will automatically turn the power to OFF. If the room temperature is lower than the setting
temperature, the heater will automatically turn the power to ON.

Automatic Shut-Off Protection

The heater features a built-in tip-over switch. The heater will automatically shut-off whenever the
heater tilts over.
9