Processing Larger Quantities; Overheat Protection; After Use - ADE KA 1802 Instrucciones De Operación

Rallador eléctrico
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
Use

Processing larger quantities

When processing larger quantities, it may be useful (for example, in case of carrots) to
occasionally remove the drum grater and clean it and the housing from stuck grated
foods.
1. Switch off the device and unplug the power cord from the mains outlet.
2. Turn the inserted drum grater counterclockwise to remove it.

Overheat protection

This electric grater has a built-in overheat protection. If the overheat protection
triggers, the device will switch off immediately during use.
In this case:
1. Release the
2. Allow the device to cool down for at least 20 minutes.
Eventually, you can use the device again as usual.

After use

1. Switch off the device.
2. Unplug the power cord from the mains outlet.
3. First remove the inserted drum grater and then the filling funnel.
4. Clean the electric grater and the parts used after each use.
22
on/off switch and unplug the power cord from the mains outlet.
2. Place a drip pan in front of or halfway
under the drum grater.
3. Put foods in the filling funnel.
4. Press the
on/off switch to switch on
the device and start processing.
5. Use the pusher to push foods forward
with your free hand.
The
spring loaded. As soon as
you release the switch, the
device will switch off.
on/off switch is
Electric grater KA 1802

Publicidad

Tabla de contenido
loading

Tabla de contenido