Air Conditioner Use; Air Conditioner Care; Cleaning; Air Filters - Haier QPCD05NXTW Instrucciones De Instalación Y Manual Del Usuario

AIR CONDITIONER USE

IMPORTANT: If the air conditioner has been tilted on its side,
wait 24 hours before turning on the air conditioner to allow
the oil to return to the compressor. This will prevent the air
conditioner from failing prematurely.
•
Allow 20" (51 cm) of space around the unit for proper air
circulation.
•
place.
•
Do not spill liquid on the control panel; it may cause an
electrical short to the interior electronic parts that would
either disable them or cause them to function improperly.
•
after plugging it into an electrical outlet, the unit will
start in Cooling mode set at 75ºF (24°C), and at High fan
speed. The control panel will display the current room
temperature.

AIR CONDITIONER CARE

WARNING
Electrical Shock Hazard
Disconnect power before cleaning.
Failure to do so can result in death or electrical shock.

CLEANING

1. Unplug or disconnect power.
2. Use only a soft cloth dampened with water to clean the
cabinet.
NOTE:
•
Do not use a liquid or spray cleaner to clean the air
conditioner.
•
DO NOT use chemicals, abrasives, ammonia, chlorine
bleach, concentrated detergents, solvents or scouring
pads. Some of these chemicals/items may damage and/
or discolor your air conditioner.
3. Dry thoroughly with a soft cloth.
4. Plug in or reconnect power.

AIR FILTERS

IMPORTANT: Do Not operate the air conditioner without air
•
When turning on the unit after previous use, it will
remember the last settings used.
•
After a normal shut down, please wait for 3 minutes
before restarting the unit.
•
In Cooling mode, this unit should not require water
to be removed. This model has a unique design that
continuously evaporates the water.
•
When the unit is operated in high humidity conditions,
you may need to empty the water tank periodically.
•
The unit will shut down automatically when the water
tank is full. The Water Full indicator illuminates to alert
you of this condition.
1. Unplug or disconnect power.
2.
the air conditioner.
NOTE:
3.
NOTE:
4.
5. Plug in or reconnect power.

INTERNAL WATER TANK

The Water Full indicator illuminates, when the internal water
To Empty the Internal Water Tank:
1. Unplug or disconnect power.
2. Place a shallow 1 quart or larger pan (not included) below
the lower drain located on the back (near the bottom) of
the air conditioner.
3. Remove the cap and the rubber plug and drain the water
tank.
4. Re-insert the drain plug and screw the cap snugly into
place.
5. Plug in or reconnect power.

STORAGE

If the unit is not being used for a long period of time:
1. Unplug or disconnect power.
2. Drain the water from the water tank. See "Air
Conditioner Care."
3. Use the original packaging to repack the unit to avoid a
buildup of dust or dirt.
4. Store the air conditioner in a cool, dry location.
9