Phonic AM1204 Manual Del Usuario página 11

37. ALT 3-4 Fader
This fader is the final level control used to adjust the ALT 3-4 mix.
This mix is created by muting input channels. Instead of simply
losing the audio from these channels, it's redirected to the ALT
3-4 mix. In the case that no input channels are muted, the ALT
3-4 mix will consist of the main mix.
38. Main Fader
This 60mm fader is final level control for the main left and right
audio feed, sent to the Main Left and Right outputs.
AM1204 / AM1204FX / AM1204FX USB
39. Level Meter
The AM's stereo 11-segment level meter gives an accurate
indication of when audio levels of the MAIN L/R output reach
certain levels. It is suggested for the maximum use of audio to
set the various levels controls to a level slightly below that which
would cause the Peak LED to light up. This will help you get the
most out of your audio without causing any distortion.
40. Phantom Power Indicator
This LED indicator will illuminate when the AM mixer's phantom
power circuit is turned on.
41. Power Indicator
This LED indicator will light up when the AM mixer is turned on.
37
38
40 41
39
7