Controls Layout; Setting Up The Appliance; Power Supply - babymoov Expert Care Instrucciones De Uso

Baby unit
1. ON/OFF and pairing button
2-3. Microphone sensitivity down adjustment button
4. Night Light intensity adjustment button
5. VOX night light
6. Night Light
7. Power On / Low battery indicator
8. Transmit icon
9. Night Light VOX icon
10. Microphone always ON icon
11. Microphone
12. Micro-USB port and power socket
Place the transmitter out of the child's reach, on a flat surface between 1m and
2.50m from baby's head. Point the transmitter microphone towards the baby.
A. BABY UNIT
• Operation from
batteries (3 x AAA 1.5 V
not included)
N.B. The range is longer when the transmitter is running on a power outlet.
Before the first use, charge the Lithium-Polymer battery for at least 3 hours. It is recommended to turn off
the device during the first charge.
The baby and parent unit are already paired with factory preset code when they are shipped from factory. However, we
recommend to perform pairing again in case interference is experienced.
1.
OFF
4.

CONTROLS LAYOUT

SETTING UP THE APPLIANCE

POWER SUPPLY

• USB Cables
power supply
Plugs not included
2.
2
5.
BABY MONITOR EXPERT CARE • Instruction manual
Parent unit
13. ON/OFF and pairing button
14. Volume down button
15. Volume up button
16. Vibration button
17. Visual level meter / Out-of-range icon
18. Power On / Battery Low / Charging icon
19. Vibration icon
20. Speaker mute icon
21. Micro-USB port and power socket
B. PARENT UNIT
• Operation from lithium
battery pack
PAIRING
1 2 1
OFF
Congratulations! Your babymonitor is now connected!
1 m
• Charging up with USB
cables
Plugs not included
3.
6.
ON
7