Troubleshooting - Magic Chef MCSCTE24BG Manual Del Usuario

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Problem
Nothing will operate
Cooktop will not operate Is the control knob set correctly?
Excessive heat around
cookware on cooktop
Cooktop cooking results
not what expected
A vapor is being emitted
from the knobs of the
cooktop
Possible Causes
Has a household fuse blown, or has
a circuit breaker tripped?
Is the cooktop wired properly?
Is the cookware the proper size?
Is the proper cookware being used? Refer to "Cookware" section on page 16.
Is the control knob set to the
proper heat level?
Is the cooktop level?
Is the cooktop in its first use(s)?
Replace the fuse or reset the circuit breaker.
If the problem continues, call an electrician.
Refer to "Installation Instructions" on page 11.
Push in knob before turning to a setting.
Use cookware about the same size as the surface cooking
area, element or surface burner. Cookware SHOULD NOT
extend more than 1/2" (1.3 cm) outside the cooking area.
Refer to "Cooktop Controls" section on page 17.
Level the cooktop. Refer to "Installation Instructions" on
page 11.
During the first use(s), a vapor may be seen exiting the
holes around the knobs of the cooktop. This is normal and
SHOULD disappear after use.
20
Solutions