Maintenance; Programmed Routine Maintenance - Sistem-Air Autocleaner Manual Tecnico

Autocleaner instructions manual
N. cycles Autoclean.
1
1 10
min..........max
Press Enter
Autocl.
activation:
Daytime schedule
Daily schedule
Press Enter
Daytime schedule:
08:00 20:00
Start Stop
Press Enter
Set unit stop
with Autocleaner
YES
Press Enter

12 - MAINTENANCE

OPERATION, IT IS MANDATORY TO UNPLUG THE POWER SUPPLY
CABLE FROM THE POWER SUPPLY SOCKET. PROTECTIVE MASK

12.1 Programmed routine maintenance

The self-cleaning system doesn't require a programmed routing maintenance. It is recom-
mended to carry out some of the operations for the good functioning of the appliance, such
as the visual control of the correct functioning of the condensation draining and the cleaning
of the vent grid of the compressor's fan.
20
NO
BEFORE CARRYING OUT ANY MAINTENANCE
AND GLOVES MUST ABSOLUTELY BE WORN
NR. OF AUTOCLEANER CYCLES:
7
1
Number of activations of the Autocleaner
system in a continual way . Use the up
and down arrows to change the number
of activations of the Autocleaner system.
Press ENTER to move onto the next
screen.
AUTOCLEANER ACTIVATION:
8
1
Daytime – permission to activate the
Autocleaner system from 8 to 20.
Daily time - permission to activate the
Autocleaner system 24/7. Use the up and
down arrows to select the wished heading.
Press ENTER to move onto the next
screen.
In case the daytime has been selected,
9
1
use the up and down, left and right
arrows to change the hours if required.
Press ENTER to move onto the next
screen.
By selecting YES the system stops suc-
10
1
tion automatically and activates fi lter cle-
aning. By selecting NO the systems waits
for suction to stop and then activates fi lter
cleaning. Use the up and down, left and
right arrows to select the wished heading.
Press ENTER to save.
05/07/11 Rev:1.0.0