AEG MRC 4117 Instrucciones De Servicio página 56

Ocultar thumbs Ver también para MRC 4117:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 35
English
56
CAUTION:
• Batteries may leak and lose battery acid. If the device is not used for long periods,
remove the battery.
• Different batteries or new and used batteries may not be used together.
• Batteries must not be disposed of in the garbage Please bring used batteries to
competent collection centers or back to the dealer.
Power supply (Adaptor)
1. Make sure the grid voltage corresponds to the figures on the rating plate.
2. Connect the power adapter to a properly installed grounded power outlet. Connect
the device with the plug connector by inserting its plug into the DC 4.5 V jack of the
device.
CAUTION:
• Only use the supplied power adaptor for this device. Do not use for other devices.
• Only use power adaptor with 4.5 V (
the device.
NOTE:
• Disconnect from mains power supply during longer periods of non-use.
• If no backup battery is inserted, time and station settings will be deleted during a
power failure or when disconnecting from mains power supply.
Battery Operation
(Batteries are not included with the device)
You also have the option of operating the unit with 3 Type R6 "AA" batteries.
1. Open the battery compartment (7) at the bottom.
2. Insert 3 R6 "AA" batteries 1.5 V. Mind the correct polarity (indicated on the bottom of
the battery case)!
3. Close the battery case.
WARNING:
Do not expose the batteries to intense heat, such as sunlight, fire or similar. Danger of
explosion!
), other adaptors may cause damage to

Publicidad

Tabla de contenido
loading

Tabla de contenido