CAUTION:
• Batteries may leak and lose battery acid. If the device is not used for long periods,
remove the battery.
• Different batteries or new and used batteries may not be used together.
• Batteries must not be disposed of in the garbage Please bring used batteries to
competent collection centers or back to the dealer.
Setting and storing stations
1. Press the RADIO button (9), to switch the unit to radio mode. The radio symbol and the
current frequency appear in the display (2).
2. If you want to store a station, select a memory location by pressing the CHNEL button
(5).
3. Press the CH+ button (6) or CH- button (10), to set a station. The corresponding fre-
quency is shown in the display.
4. To store the station you have found, hold the CHNEL button down, until you hear a
signal. The station is now stored to the preselected memory location.
5. If reception is too weak, change the position of the dipole antenna in order to improve
the reception.
Select stored stations
To select the stored radio station, press the CHNEL button repeatedly (5).
Volume
The volume can be adjusted using the UP/DOWN buttons (3/4).
Temperature display
The unit detects the current ambient temperature and it is shown in the display.
• In normal display mode (Fig. 2) you can alternate the temperature display between °C
(degrees Celsius) and °F (degrees Fahrenheit) with the DOWN button.
Switch-off
The unit is switched off when the display shows normal mode (see Fig. 2).
Restore Factory Defaults
Any malfunctions during operation can be rectified by pressing the Reset button.
• Push the (8) button with the help of a wire or a similar item to reset the electronics.
English
57