Karel LT48 Guía De Operación página 9

Memory Keys
How To Program Memory Keys On LT48(-H)
The Memory Keys are not preset and can be
programmed to any of the following:
- Extensions,
- Lines,
- Common Pool numbers,
- Private Pool numbers,
- Some system features,
You may program the Memory Keys as follows:
1. In the Setting Mode, enter the Phone Settings
menu, and then the Key Settings sub-menu.
2. Select the option that you require from the
options listed above.
3. Press the Memory Key that you wish to
program.
4. Proceed as indicated by the LCD messages.
If you wish, you may use the Auto Settings option in
the Key Settings sub-menu to program all of the
Memory Keys at the same time. Refer to pg 10 for
details.
Following are the main points to program the
Memory Keys:
Each Memory Key may be programmed for two
different
Secondary Function. While programming a Memory
Key, if a feature is to be assigned to its Primary
Function, the key should be pressed until the first
"beep". If a feature is to be assigned to its
Secondary Function, then the key should be
pressed until the second "beep".
8
functions: Primary Function and