Coupling - Cardan Shaft Version - JF 1300 S2 Manual Técnico De Operación

4.2 - Coupling - cardan shaft version

The machine must be turned off when you are going to couple the JF 1300 S2
with the Forage Harvester.
a) Take off the alligners of the Forage Harvester, and
install the pins 1 and 2 in harvester platform as
(Figure 1).
b) Fit the points 3 and 4 of your JF 1300 S2 in the pins 1
and 2 in harvester platform as (Figure 2).
c) Tighten the screws on the right side of the platform,
indicated with 1 and 2 as (Figure 3).
d) Tighten the screws on the left side of the platform,
indicated with 3 and 4 as (Figure 4).
18
1
1
3
2
3
1
1
4
3
4
2
4
2