Turntable Operation; Repeat Function - 1byone 471UK-0007 Manual De Instrucciones

LISTEN TO THE PHONO (TURNTABLE)
EN
Gently Open The Dust Cover
DE
1. Lift the Dust Cover all the way up until it stops. The cover will now stay open.
2. Use a screwdriver and turn the screw lock clockwise to unlock the turntable plate
FR
(if the screw lock is locked).
ES
3. Remove the tie-wrap from the Tone Arm (if the tie-wrap is still in place).
4. Remove the white protective needle cover by gently pulling it forward.
IT
5. Release the Tone Arm Hold Down Clip by gently pushing it to the right. This will
unlock the Tone Arm from its arm rest.
NOTE: Re-lock the Hold Down Clip when moving the turntable to another location.

Turntable Operation

1. Connect to power and press the
2. Press the Function button until the "PHONO and PHO" indicator shows on the
display, indicating PHONO mode has been selected.
3. Toggle the Speed selector to the correct position (33, 45 or 78 RPM).
4. Gently place a record on the turntable.
5. Lift the Tone Arm Control lever and move the Tone Arm to the desired starting
point over the record.
6. Lower the Tone Arm Control lever and the Tone Arm will move down and music
will start playing.
7. Turn the Volume Control dial to adjust the volume to the desired level.
8. Toggle the Auto Stop Control switch to select the auto stop function.
9. At the end of the record, the Tone Arm will stop automatically when Auto Stop
Control is selected. You must return the Tone Arm to the Tone Arm Rest manually
when the record is finished.
NOTE: When playing records, sound output of the built-in amplifier is limited to avoid
feedback and rumble. This is normal. Keep the volume as low as possible on the turntable
and instead increase volume on the external amplifier.
button to turn on the turntable.
6
Adapter for 45 RPM (Included Accessory)
This adapter allows for the playing of 45 RPM records.
1. Gently place your 45 RPM record onto the turntable.
2. Place the 45 RPM Adapter over the spindle.
3. Follow normal turntable operation steps to play the record.
LISTENING TO CD DISCS
Loading a Disc
1. Connect to power and press the
2. Press the button to open the CD compartment door, the "Cd" indicator shows
on the display, indicating CD mode is selected. Dashes "---" will flash on the display
after one second.
3. Place a CD into the CD compartment.
4. Press the button to close the CD door.
Playing a Disc
1. After loading the CD, the CD will auto play and the track number will show on the
display. If necessary, press the button to begin playing the disc.
NOTE: An "ERR" error will be displayed if the disc is facing wrong-side-up in the CD
compartment. Eject the CD and insert it again with the correct side facing up.
2. Turn the Volume control dial to adjust the volume to the desired level.
3. To temporarily stop playback, press the
flash. To resume play, press the button again.
4. Press the / buttons to skip between previous or next tracks.
5. Press and hold the / buttons to fast search through the current track.
6. Press the +10 button to skip the next 10 tracks.
NOTE: +10 function is for MP3 discs only.
7. Press the button to stop playback.

Repeat Function

1. During disc playback:
• Press the Repeat button once and the "REP 1" indicator will show on the display.
The turntable will then keep repeating the currently playing track.
• Press the Repeat button twice and the "REP FOLDER" indicator will show on the
display. The turntable will play the desired disc folder repeatedly.
NOTE: Repeat folder function is for MP3 discs only.
• Press the Repeat button three times and the "REP ALL" indicator will show on the
display. The turntable will play the entire disc repeatedly.
2. To cancel all repeat functions, press the Repeat button repeatedly until the
REPEAT indicator on the display turns off.
button to turn on the turntable.
button once and the display digits will
7
EN
DE
FR
ES
IT