Listening To Radio; Listening To A Usb Device - 1byone 471UK-0007 Manual De Instrucciones

Programming a Disc Playlist (Up to 20 Tracks) (Disc Only)
EN
1. When a disc is playing, press the
DE
2. Press the PROG button and "P01" will show on the display.
3. Press the / buttons or + 10 button to select the track from the loaded disc
FR
you wish to play first.
4. Press the PROG button to confirm the track selection.
ES
5. Repeat steps 3 and 4 to confirm more songs in the order you wish them to be
IT
played. Up to 20 songs can be selected for the playlist.
6. Press the button to start playing the programmed playlist. The "PROG" indicator
will show on display.
7. Press the button twice to cancel a programmed playlist.

LISTENING TO RADIO

1. Connect to power and press the
2. Press the Function button until the AM or FM indicator shows on the display.
Select AM or FM mode.
3. In FM mode, the "FM and rAD" indicator will show on the display.
4. In AM mode, the "AM and rAD" indicator will show on the display.
5. Rotate the Tuning control dial to search and select the desired station.
6. Rotate the Volume control dial to adjust the volume.
NOTE:
• To obtain the best AM reception, slightly rotate the turntable or move the turntable to
a different area of the room until the best reception is obtained.
• To obtain the best FM reception, fully extend the FM wire antenna at the back of the
turntable. Avoid close proximity to the speakers and other electrical appliances.
LISTENING TO A BLUETOOTH DEVICE
Connecting to a Smartphone or Tablet by Bluetooth
1. Connect to power and press the
2. Turn on Bluetooth mode by pressing the Function button until the "bt" indicator
shows on the display. The indicator will flash on the display.
3. Turn on the Bluetooth of the playback device and use it to search for other
Bluetooth devices.
4. Select "1byone BS012" from the list of found devices on your Bluetooth playback
device.
5. The indicator will stop flashing and become solid if pairing is successful.
6. The playback device's music can now be played through the turntable's speakers
using Bluetooth.
button to stop playback.
button to turn on the turntable.
button to turn on the turntable.
8
NOTE:
• If problems arise, hold the / Pair button to reconnect again.
• If it is necessary to connect another device, hold the
• If a mobile call is received, the music will stop playing until the call ends.

LISTENING TO A USB DEVICE

Loading a USB Device (Supports MP3 Files)
1. Connect to power and press the
2. Insert a USB device into the USB port.
3. Turn on USB mode by pressing the Function button until the USB indicator shows
on the display. The USB will auto play and the track number will show on the
display. If necessary, press the button to begin playing the USB's music.
4. Make sure the Volume control dial is in the correct position.
5. Before removing the USB device, press the
NOTE: If power off the turntable during playing the music from USB device, the turntable
won't resume playback from USB device when powering on again, user need to re-select
USB function.
Play/Pause Control
1. When a USB memory stick is connected, press the
music.
2. Pause playback temporarily by pressing the
be paused and the current track number will flash on the display.
3. Press the button again to resume playback.
Stop Playback
Press the button to stop playback.
Skip Track
During playback, press the / buttons to skip to the previous or next tracks.
During playback, press the +10 button to skip the next 10 tracks.
High-Speed Music Search
1. During playback, press and hold the USB Skip/Search
search through the current track at high speed in a forward or backward
direction.
/
2. When the USB Skip/Search
will be immediately resumed.
/ Pair button to reconnect.
button to turn on the turntable.
button to stop playback first.
button to play the USB's
button again. Music playback will
/ buttons to skip/
buttons are released, normal playback speed
9
EN
DE
FR
ES
IT