Step 4 : Connecting; Ac Mains Lead; Step 5 : Setting; Easy Setting - Panasonic DMP-BDT100 Instrucciones De Funcionamiento

STEP 4 : Connecting

AC mains lead

To a household mains socket
(AC 220 to 240 V, 50 Hz)
≥ This unit consumes a small amount of AC power ("Quick
Start": "Off", approx. 0.2 W) even when turned off. In the
interest of power conservation, if you will not be using this
unit for an extended period of time, it can be disconnected.

STEP 5 : Setting

Easy Setting

After connecting your new player for the first time and
pressing [Í], a screen for the basic settings will appear.
Preparation
Turn on the television and select the appropriate video
input on the television.
1
Press [Í].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then the setting information on the TV is acquired by this
TV.
2
Follow the on-screen instructions and make
the settings with [3, 4] and press [OK].
"On-Screen Language", "TV Aspect" and "Quick Start"
are set. ( 29 – 31)
After completing "Easy Setting", you can perform "Network
Easy Setting".
≥ You can perform this setup anytime by selecting "Easy Setting" in the
Setup menu. ( 31)
≥ You can also change these settings individually. (
12
(12)
VQT2U34
AC mains lead
(supplied)
29 – 31)
Network Easy Setting
After completing "Easy Setting", you can continue with
"Network Easy Setting".
Select "Wired" or "Wireless" and press [OK].
Network Easy Setting (Connection Test)
Select a connection mode.
Current setting : Wired
LAN cable connection:
Connect a LAN cable to the unit and select "Wired".
Wireless LAN connection:
Connect the Wireless LAN Adaptor (DY-WL10) to the USB
port and select "Wireless".
Wired
Wireless
OK
RETURN
∫ "Wired" connection
Follow the on-screen instructions to make your connection settings.
≥ When you experience problems (
∫ "Wireless" connection
If you select "Wireless" and "Wireless LAN Adaptor is not
connected." is displayed, check that the Wireless LAN
Adaptor is fully inserted. Alternatively, disconnect and
reconnect it. If there is still no change in the display, consult
your dealer for advice.
Select "WPS (PUSH button)" or "Search for
access point" and then follow the on-screen
instructions and make the settings.
Access Point Connection Setting
Select a connection method for access to
Wireless LAN.
Please refer to the operating instructions of
the access point about connection methods.
WPS (PUSH button)
Search for access point
WPS (PUSH button):
If your Wireless router (Access point)
supports WPS (PUSH button), you can
easily perform the settings by pressing
WPS button on it.
WPS (Wi-Fi Protected Setup) is a standard
that facilitates settings relating to the
connection and security of wireless LAN
devices.
1 Press WPS button or corresponding button of Wireless
router (Access point) until the lamp starts flashing.
≥ For details, refer to the operating instruction of
Wireless router (Access point).
2 Press [OK].
13)
e.g.
1
*