Section Viii. Trouble Shooting - Aobosi AMR520 Manual De Instrucciones

Fault
Phenomenon
After connecting
power supply
and turning on
the switch, the
product fails to
work
During the early
uses, the motor
generates
unpleasant smell
This machine
stop during
operation
Noise is
generated
during
operation.

Section VIII. Trouble Shooting

Analysis of cause
1. After turn on the
machine, wait for 1s,
it will work. It is
normal.
2.After 1s, it still no
work, maybe poor
contact between plug
and socket
It is a normal
phenomenon
Too low voltage
1.
Excessiveamountof
2.
food material has been
loaded
The machine has
3.
operated continuously
for long time.
The machine operates
1.
in an unbalanced state
due to failure to
mount auger or juice
filter in place.
The starting motor in
2.
the frame hasbeen
damaged.
Fault resolution
Re-plug it properly
Replace thesocketand try
1.
again, or contact after
Sales Support Email:
info@iaobosi.com
If this phenomena occurs
frequently, send it to our
authorized service center
nearest to you for inspection.
Check whether the voltage
1.
is too low
Disconnect the power
2.
supply and remove
excessive food material
It is a normal phenomenon
3.
and themotorwill resume
after a break time.
Mount auger or juice
1.
filter in place or
Contact after Sales
Support Email:
info@iaobosi.com
16