Multi-stage
1. Hold down PROGRAM LOCK and then press PROGRAM
button. Hold together for 2 sec.
Result :
2. Press appropriate NUMBER buttons for the desired
memory number.
Result :
3. Select power level by pressing the POWER LEVEL
SELECTOR button or DEFROST SELECTOR button.
Result :
4. Press NUMBER buttons to set the cooking time.
5. Repeat steps 3 and 4 for II or III stage memory
programming.
6. Hold down PROGRAM LOCK and then press PROGRAM
button. Hold together for 2 sec once again.
Result :
7. When you want to program more, repeat the procedures
above again.
Be sure to press the buttons firmly.
Press the POWER LEVEL SELECTOR button or DEFROST SELECTOR button
one or more times until you get the desired power level.
CM1529A-1_XEU_DE68-04030B-03_EN_160629.indd 18
PROG indicator appears in the digital display.
Selected memory program code appears below
the PROGRAM indicator.
Default power level HIGH appears in the
display at first press of the POWER LEVEL
SELECTOR button.
PROG indicator and memory number indicator
blink 3 times in the digital display with a beep
sound. And then the display goes blank.
The maximum time according to each cooking power level can be referred to in the
title "Power Levels and Time Variations" on page 15. The NUMBER buttons will not
operate or respond when you press a cooking time exceeding the maximum value.
It is not possible to set a cooking time for longer than the maximum time allowed on
the chosen program. It is advisable to press CANCEL button and to enter a new
power level and cooking time.
Be sure to press the buttons firmly in the right position.
CAUTION
Memory programs are available up to 30 items.
Make sure the unit is properly programmed.
After programming is finished, all you have to do for memory cooking is to press
the NUMBER buttons. Then the selected memory program automatically starts
cooking.
You can not set up the same POWER LEVEL or DEFROST.
It operates as setting up sequence.
English - 18
2016-06-29
5:31:34