Basic Functions - Dini Argeo MCWL Serie Manual Usuario

NOTE FOR THE USER:
Please take note that when the "(TECH.MAN.REF.)" is mentioned, this refers to the Technical Manual,
which may be obtained from the Reseller.
TURNING THE INSTRUMENT ON AND OFF
TO TURN ON the instrument press the ON/OFF key for at least a second: the display shows the message
"-on-" and, upon key release, the instrument starts to turn on with the selfdiagnosis messages. The displayed
messages are:
- first part of the programme version in the "d X.XX" format
- second part of the version in the "k X.XX" format
- indication of approved instrument (LEGA) or for internal use (hire).
- bt x in which x is a number between 0 and 9, indicating the charge level.
CAREFUL: if the level is zero, the instrument will stop turning on due to insufficient power supply
voltage and will automatically turn itself off. If the level is sufficient, the instrument will completely turn
itself on and dispose itself in the standard weighing mode.
TO TURN OFF the instrument press the ON/OFF key with the instrument on for at least a second; the display
shows the message "-OFF-" and, upon key release, the instrument turns off.
SCALE ZERO FUNCTION
By pressing the ZERO/TARE key for a few seconds, one zeros the displayed value of the weight (on the
entire capacity) and the storage of zero of the instrument.
The confirmation of the ZERO operation is shown by the "ZEro" message which appears for a second on the
LCD display, also the à0ß indicator turns on.
The zero value remains active until the following zeroing of the instrument; turning off the instrument does not
modify the value of zero.
SEMI-AUTOMATIC TARE
By pressing the ZERO/TARE key for an instant, one obtains the taring of the load on the scale (for the entire
capacity).
For an instant the message "tArE" is displayed, followed by"-TA-"; the NET indicator also turns on.
The tare value remains active until the next zeroing or the following tare operation or until the instrument is
turned off.
ENTERING MANUAL TARE
By pressing the F1 key for a few seconds, it is possible to enter a manual tare from keyboard.
If an automatic tare has been entered, the same value to be modified will appear, otherwise "0000" will appear.
Upon the confirmation of the entered value, the "-TM-" message is displayed and the NET indicator turns on.
The tare value remains active until the next zeroing or the next tare or until the instrument is turned off.

BASIC FUNCTIONS

6