Petra electric Perlfit PF 15 Instrucciones De Manejo página 11

whole bubbling energy to one point. It is
suitable for intensive treatment of local
areas.
As the emanating air can become hot, the
treatment has to be effected under water
only.
Bath additives
The bath oils which are available as
accessories have been developed
especially for the cosmetic use in
hydromassages for feet or to enrich the air
in the room.
The active substances are treated in a
basis which is kind to the skin and also
prevent the skin from drying out.
Beside the cosmetic effect, the room is
enriched with an agreeable perfume.
The following scents are available:
- Pine essence
- Hay flower
- Rosemary
- Balm
- Lavender
- Horse chestnut
Technical data
Voltage 230 V 50 Hz
Consumption 470 W
Safety class II
Safety type IP X 4 safety against
splashing water
Build up pressure max. 120 hPa
For UK use only
1.This product is supplied with a 13 A
plug conforming to BS 1363 fitted to the
mains lead. If the plug is unsuitable for
your socket outlets or needs to be
replaced, please note the following. If
the plug is a non-rewireable one, cut it
from the mains lead and immediately
dispose of it. Never insert it into a socket
outlet as there is a very great risk of an
electric shock.
2.The replacement of the plug at the mains
lead has to be done according to the
following instructions:
Important: The wires in this mains lead
are coloured in accordance with the
following code:
blue: Neutral
brown: Live
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
- the wire which is coloured blue must
be connected to the terminal which is
marked with the letter N or coloured
black,
- the wire which is coloured brown must
be connected to the terminal which is
marked with the letter L or coloured
red.
Do not connect any wire to the terminal
which is marked with the letter E or by
the earth symbol , or coloured green
or green and yellow.
3.If a 13 A (BS 1363) plug is used it must
be fitted with a 3 A fuse conforming to
BS 1362 and be ASTA approved. If any
other type of plug is used, the appliance
must be protected by a 5 A fuse either in
the plug or adapter or at the distribution
board.
If in doubt - consult a qualified electrician.
4. Never use the plug without closing
the fuse cover.
The appliance complies with
the EC regulation No. 93/42
EWG for medical products.
Subject to technical changes.
Proper dispose of the packing material.
11