Technical Data; Noise Information; Vibration Information - Worx Sonicrafter WX682 Manual Original

1. ON/OFF SWITCH
2. BATTERY PACK
3. VARIABLE SPEED DIAL
4. UNIVERSAL-FIT ACCESSORY INTERFACE*
5. LED LIGHT
6. SMALLER FLANGE (FOR OTHER BRANDS'
SANDING PADS)
7. FLANGE
Not all the accessories illustrated or described
are included in standard delivery.
*Works with other oscillating tool brands'
accessories.
The following brands are trademarks owned by third
parties which may be registered by their respective
owners: Black & Decker
®
Craftsman , Dremel , DeWalt
® ®
Imperial Blades, Makita
®
Performax , Porter Cable
®
Tool Shop .
®

TECHNICAL DATA

Type WX682 WX682.9 (6-designation of
machinery, representative of high frequency
oscillation tool)
Voltage
No load speed
Machine Weight
**Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection
Oscillating Tool
, Bosch , Chicago Electric
®
, Fein , Genesis ,
® ® ®
, Mastercraft , Milwaukee
®
, Ridgid , Ryobi , Skil , and
® ® ® ®
WX682 WX682.9
20V Max**
5000-18000/min
1.2kg 0.8kg
L : 76dB(A)
pA
L : 87dB(A)
wA
3.0dB(A)

VIBRATION INFORMATION

Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Typical weighted
vibration
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
,
®
sanded.
The tool being in good condition and well
,
®
maintained.
The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration
tool use across a number of days.
Vibration emission value
a = 2.615m/s
2
h
Uncertainty K = 1.5m/s²
C or less.
o
7
EN