Technical Data; Battery Charger - SPIT P18 Manual Original

Ocultar thumbs Ver también para P18:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 43
SPIT P18 Lithium
Specified conditions of use
The device is designed exclusively for driving
screws
into
and
loosening
plasterboard and chipboard on wood and sheet
steel substructures.
Requirements for the user
The tool must only be operated, maintained and
serviced by authorised trained personnel. The
personnel must be made aware of the relevant
dangers.

Technical data

Rated voltage of battery in V DC
Capacity in Ah
1. n
= No-load speed (1st gear)
0
in rpm
8,5 Nm
Nm
max.
Noise levels
L
= A-rated sound pressure level
pA
L
= A-rated sound power level
wA
K = Measurement uncertainty value
The noise level can exceed 85 dB(A)
during operation.
Wear hearing protection!
Triaxial
vibration
determined in accordance with EN
60745.
K = Measurement uncertainty value
The vibration emission level given
in this information sheet has been
measured in accordance with a
standardised test given in EN 60745
and may be used to compare one tool
with another.
The vibration emission level will vary because of
the ways in which a power tool can be used and
may increase above the level given in this
information
sheet.
This
underestimation of vibration when the tool is used
regularly in such a manner.
Note: To be accurate, an estimation of the level
of exposure to vibration experienced during a
given period of work should also take into
account the times when the tool is switched off
and when it is running but not actually when
doing the job.
This may significantly reduce the exposure level
over the total working period. Identify additional
safety measures to protect the operator from the
screws
from
effects of vibration such as: maintain the tool and
accessories, keep the hands warm, organisation
of work patterns.
Battery

Battery Charger

emission
level
could
lead
to
4. Operation
Remove the battery from the device before
undertaking any work on the device.
This safety measure prevents accidental starting of
the power tool.
English
Fitting screws in wood - max. ø in
mm
Weight in kg
Battery Li-ions
Rated voltage of battery V DC
Capacity in Ah
Mains voltage in V~
Frequency in Hz
Charging voltage in V DC
Charging current in A
Operating temperature range in °C
Battery charging time in min.
Your battery charger is double-
insulated in accordance with EN
60335. For this reason an earth wire
is not required.
19

Publicidad

Tabla de contenido
loading

Tabla de contenido