GB
CONTENTS
1
QUICK START
6 CUSTOMER SERVICE
7 WARRANTY
1. QUICK START GUIDE
DO NOT wash tubing or connector.
Before first use, clean all parts that will
come into contact with milk according to
instructions on page 3, section 2.2.
Assembly
Proper assembly is essential to ensure
proper function and suction.
PLEASE SEE QUICK START DIAGRAM ON
THE INSIDE FRONT COVER
1
Insert purple diaphragm so that feet align
with the cutouts
2
Attach clear cover and twist so tubing
connector is at the back
3
Attach breast cushion
4 Insert valve
5
Attach bottle
6 Attach tubing
7 Secure connector
8
Attach to electric pump unit
Only use the Lansinoh® Compact
Single Electric Breast Pump with
Lansinoh® Breastmilk Expression Set
Getting Started
Hold the Breastmilk Expression Set to your
breast so your nipple will extend straight
toward the nipple tunnel of the breast
cushion. Make sure the breast completely
fills the breast cushion so that a vacuum
is formed and no air escapes. Make sure
the set is tilted slightly downward to allow
milk to flow into the bottle.
Using Let-Down and Expression
Phases
•
Press the power button
pump in Let-Down Phase. Let-Down
Phase will run automatically for 2
minutes.
2
•
To begin the Expression Phase sooner,
press the Let-Down/Expression toggle
button
to move to the Expression
Phase. Press
switch back to Let-Down Phase.
•
Let-Down Phase is a faster pumping
style that mimics the short, rapid
sucking your baby uses to initiate milk
flow.
•
Expression Phase mimics the slower,
deeper sucking of feeding, and
features 5 adjustable suction levels
that can be tailored for your comfort.
•
6
The breast pump features LED lights
beneath the purple keypad to indicate
7
which setting you are on.
8
2. PUMP
8
2.1 Breast Pump Parts and
8
Accessories
Breast pump unit
Power button
Let-Down/Expression toggle button
h
i
g
Breastmilk Expression Set
a
Diaphragm Cap
Diaphragm
b
ComfortFit
Breast
®
c
Cushion (25mm)
Breast Cushion Body
d
White Valve
e
160ml (5oz) Bottle
f
Sealing Cap
g
to start the
again at any point to
2.2 Cleaning Instructions
Before First Use
•
•
•
Suction level control
•
•
•
•
a
j
b
Before Each Pumping Session
k
•
c
l
•
d
e
m
f
•
Item Number
•
P53410
P53402
P54103
P53454
P53401
Cleaning After Each Pumping Session
•
P53451
P53461
Breast Pump Parts and
Accessories
Silicone Tube
h
(800mm)
Pump Connector
i
Teat Cover
j
NaturalWave® Slow
k
Flow Teat
Teat Collar
l
AC Adapter
m
Unless otherwise instructed by
your health care provider, follow
these instructions.
DO NOT wash tubing or connector.
Always wash and dry hands thoroughly
with soap and water before handling the
Breastmilk Expression Set.
Disassemble the Breastmilk Expression
Set and place parts in a large pot.
Cover the parts in water making sure
there is room for all of the parts to float
freely in the pot.
Bring the water to the boil and allow the
parts to a boil for 5 minutes.
After boiling remove the parts from the
pot with tongs and place the pieces
neatly on a clean paper towel or in a
clean drying rack and allow them to air
dry.
Allow the parts to dry completely
before assembly and use. Partially dried
parts may affect the operation of the
pump.
Once parts are dry they can be stored in
a clean plastic tub with a lid or in a clean
plastic zipper bag.
Always wash and dry hands thoroughly
with soap and water before handling the
Breastmilk Expression Set.
Before assembling the Breastmilk
Expression Set, be sure that all of the
parts are completely dry.
Visually inspect the individual
components for cracks, chips, tears,
discoloration or deterioration. These
may affect the functionality of the
pump.
Should you have any questions or
concerns about your parts please visit
www.lansinoh.co.uk, call +44 (0) 113 205
4201 in the UK, or contact your country
distributor for guidance.
Disassemble the Breastmilk Expression
Set, setting aside tubing and connector.
Item Number
P54100
P54106
P53462
P75900
P53463
P53470
1