Connecting The Ac Adapter And Cable - Oki PT330 Manual De Instrucciones

4-4. Connecting the AC Adapter and Cable

Standard Model
(1) Connect the cable connector of the AC adapter to the power connector.
AC Adapter
Connector
Caution: Before connecting the AC adapter, turn off the power switches
on the printer and all the devices connected to the printer. Also,
remove the plug of the AC adapter power cable from the outlet.
Caution: Use the specified AC adapters.
Caution: Perform the adapter connection with the device placed vertically
for easy operation.
Caution: As the connector is clipped in place after insertion in order to
prevent it from falling off, when performing insertion, (1) grip the
cable base with one hand, (2) slide the outer part of the
connector upwards with the other hand (3) and push in until it
locks into place.
Cable Base
①
The Outer Section of the Connector
②
Power Connector
Flat Side
Cable Connector
Power Cable
16
AC Adapter
AC Inlet
③