Vertex Standard VX-1210 Manual De Instrucciones página 18

General
Frequency Range:
Emission Modes:
Synthesizer Steps:
Antenna Impedance:
Operating Temperature Range:
Frequency Stability:
Power Requirements:
Current Consumption:
Case Size (WxHxD):
Weight (approx.):
Transmitter
Power Output:
Modulation Type:
Spurious Radiation:
Carrier Suppression:
Undesired Sideband Suppression: 55 dB @ 1.5 kHz tone
Audio Response (A3J):
3rd-order IMD:
Microphone Impedance:
Receiver
Circuit Type:
Intermediate Frequencies:
Sensitivity:
IF Rejection:
Image Rejection:
Selectivity (–6 dB/–60 dB):
Audio Output:
Clarifier Adjustment Range: ±200 Hz (J3E/A1A/F1B),
VX-1210 O
PERATING
RX: 0.5 ~ 30 MHz,
TX: 1.6 ~ 30 MHz
A1A (CW), J3E (LSB/USB), H3E (AM), F1B (AFSK)
10 Hz
50 Ω, Unbalanced
–22° F to +140° F (–30° C to +60° C)
±1 ppm
DC 14.4V Lithium-ion Battery
Receive (Saver off) 0.5 A, Receive (Saver on) 0.1 A,
Transmit (20 W) 5 A, Transmit (5 W) 3 A
7.6" x 2.9" x 10.8" (193 x 74 x 274 mm)
7.1 lbs( 3.2 kg) with FNB-66LI Lithium-Ion Battery Pack
20 W/5 W (J3E/A1A/F1B),
10 W/2.5 W (H3E) (Selectable)
Balanced Modulator (SSB: J3E),
Early Stage (Low Level) (AM: H3E)
56 dB down (Harmonics)
55 dB
350 to 2650 Hz (–6 dB)
–31 dB
2 kΩ, condenser
Double Conversion Superheterodyne
47.055 MHz & 10.7 MHz
0.25 μV (J3E/A1A, 10 dB S/N)
80 dB
80 dB
2.4 kHz/5.0 kHz
At least 1.5 W into 4 Ω @ 10% THD
±400 Hz (H3E)
Specifications are subject to change without notice or obligation.
M
ANUAL
Specifications
17