Electrical Installation - Festo EGSL Instrucciones De Utilizacion

EGSL
EGSL-...
Max. screw-in depth
– Guide rail
– Yoke plate
Tightening torque
Fig. 7
For useful load geometries with projection in
the longitudinal direction of the slide:
• Make sure that the useful load does not
strike against the motor.

Electrical installation

If proximity sensors are used:
• Push the proximity sensors through the
cut-out aC on the housing cover into the
upper sensor slot.
The cable of a proximity sensor can be
guided away via the cross groove (C) into
the lower groove.
Protecting the end positions against
uncontrolled overrunning:
• Check whether additional hardware proximity switches are necessary
• Observe that this reduces the effective stroke (è catalogue specifications,
www.festo.com/catalogue).
26
35
[mm] 7.4
[mm] 8.4
[Nm] 2.9
Fig. 8
Fig. 9
45 55
10.8 10.8
8.4 8.5
5.9 5.9
.
Festo EGSL 1602b English
75
12.4
12.9
9.9
aC
(C)