Master & Dynamic MW50 Manual De Usuario página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 30
TURN ON AND CHARGE
To turn on the MW50 slide the switch
to the middle position.
Each time you turn on the headphone
the battery status will be displayed. To
recall battery status, slide switch to
for less than 2 seconds.
The headphone will automatically
search for previously connected
devices. A solid light indicates you
are connected. If no connection is
made after 2 minutes, the headphone
will enter deep-sleep mode. Cycle
power switch to awaken.
16
ON
Low Battery
Med Battery
Full Battery
Connected
Charging
Plug in the USB-C
connector and connect
to a USB port to charge.
EN
The headphone turns off
when the USB-C is plugged
in. Avoid using the device
while it is charging
• •
A solid orange light
A solid orange light
indicates charging and a
indicates charging and a
solid green light indicates
solid green light indicates
a full charge when the USB
a full charge when the USB
cable is connected.
cable is connected.
Charging
Charging
Full Charge
17

Publicidad

Tabla de contenido
loading

Tabla de contenido