Rear Panel Connections; Internal View; Important - GRAF & MEYER eXentro Charger C48 Guía De Seguridad

6.2 Rear panel connections

1
3

6.3 Internal view

2
1. Mains power input socket
2. Auxiliary output terminals : 2.5 mm² max.
3. Output contacts : 1.5 mm² max.
4. Main outputs (outputs 1 to 6): 16 mm² max.
5. Temperature sensor input
6. Battery connection : 16 to 50 mm² max.
Below picture shows the location of the different fuses and jumper
(for the battery impedance setting). (for the battery impedance setting).
1. Auxiliary output fuses 1-3 (5A)
2. Main output fuses F1 to F6 (32A)
3. Battery/Power supply fuse F8 (12.5A)
4. Jumper for internal battery impedance selection
5. AC mains power fuse F1 (8A)
4
kept free. Do not create additional
openings because this can cause
the device to malfunction and
voids the warranty.
6. Installation
5 6

Important:

the openings provided
in the cabinet must be
1
2
3
4
5
9