Inspection & Maintenance; Fault Finding Chart - BH FITNESS Columbia G-6490 K Instrucciones De Montaje Y Utilización

benefi ts of your controlled exercise program, you will feel
better, have more energy and suffer less stress. You will see
for yourself that it is worth staying in shape with BH.
INSPECTION & MAINTENANCE
Switch the unit off and unplug the mains cable.
Use a damp cloth or towel to clean the dust off the
treadmill, especially the side bars and the electronic
console. Do not use solvents.
Use a vacuum cleaner to carefully vacuum around the
visible components (belt, structure, etc.). You can also
vacuum the underside of the unit by resting it on one
of its sides. Similarly, you can vacuum the inside of the
motor housing by removing the cover that protects the
motor (be careful with the wires).

FAULT FINDING CHART

PROBLEM
1. The monitor does not
switch on.
2. The monitor switches on
but the motor fails to start.
3. Walking motion is jerky on
the treadmill
4. The machine stops (the
breaker trips)
5. Electrical shocks through
the handrail.
6. The treadmill belt skews
off centre
Do not he
COLUMBIA G6490 K 0180125
CHECKS
1) Make sure that the machine is plugged
in, the ON/OFF switch in position I
and that the safety key is inserted.
2) Check that the current limiter is pres-
sed in.
3.a) Check that the belt is lubricated.
3.b) Check the tension on the sliding belt.
3.c) Check the tension on the drive belt.
4) Check that the band is lubricated
5) Check that the machine is plugged
into an earthed mains socket.
6.a) Check that the machine is level on
the fl oor
6.b) Check that the machine does not
wobble.
to get in touch with us if you have any queries, by calling:
sitate
945- 29 02 58
15
Periodically check that all of the fastening elements are
duly tightened and connected correctly.
Check and tighten all the parts on your unit every three
months.
Use of this machine with worn parts, e.g. the drive belt,
running belt or rollers, may cause the user injury. If you
are unsure about the condition of any part, we recom-
mend that you replace it with original spare parts. The
use of other spare parts may cause injuries or affect the
performance of the machine.
BH RESERVES THE RIGHT TO MODIFY THE SPE-
CIFICATIONS OF ITS PRODUCTS WITHOUT PRIOR
NOTICE
SOLUTIONS
1) Plug the machine into the
Set the switch to position I
2)
3.a) Lubricate the sliding belt.
3.b) Adjust the belt tension.
3.c) Adjust the drive belt
4)
5) Plug the machine into an
6) Use the adjustable feet to
15
11/4/05, 16:59
mains supply.
and insert the safety key.
Switch the machine off
and press the circuit
breaker in. Lubricate the
treadmill band.
tension.
Reset the overload bu-
tton with the On/Off
switch at "0" and lubri-
cate the treadmill band.
earthed mains socket.
level the machine.