Publicidad
1.
Locate the first 2 metal brackets 9 1/2" from the
interior face of the face frame to the front of the
bracket and centered in the cabinet on both the
floor and ceiling of the cabinet box. (Fig 1)
2.
Stand the plywood partition erect and slide into the cabinet box
between brackets. (Fig 2) NOTE: The back edge of the plywood
partition should line up with the back face of the metal bracket
- secure with #8 x 1/2" screws provided. (Fig 3)
Slide plywood partition in until
the back edge is even with
the back edge of the bracket
3.
Slide the 2 remaining brackets in place above and
below the plywood partition located in the center
of the cabinet and 4 7/8" off the interior face of
the face frame. (Fig 4)
Secure the remaining brackets to the cabinet and
partition with #8 x 1/2" screws provided. (Fig 4)
FIGURE 2
Fig 2
Fig 1 (Front View)
Fig 3 (Back View)
FIGURE 4
Fig 4 (Front View)
4 7/8"
10-0532-02G VS-40
Publicidad
