Alarm - Waeco MagicSafe MSG150 Instrucciones De Montaje Y D’uSo

Alarma de gas
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
MSG-150.book Seite 26 Donnerstag, 30. Oktober 2008 5:03 17

Alarm

If an alarm occurs, an acoustic signal sounds over the internal siren and the red LED
(8 3, page 5) glows. If the MS-620SI external siren is connected, an additional acoustic
signal sounds over the external siren.
To interrupt the internal alarm, press the button (8 4, page 5).
Switching on MSG-150 in combination with MS-620 or MS-650
Switch the MS-620 or MS-650 alarm system on as usual:
On the remote control for the alarm system, press
The bottom button (MS-620)
The grey button (MS-650)
An acoustic signal sounds and the green LED (8 1, page 5) flashes for approx 10
minutes.
During this time the MSG-150 conducts a system test and the sensor is brought to
operating temperature.
If an alarm occurs, an acoustic signal sounds over the internal siren and the red LED
(8 3, page 5) glows. The internal relay sends an earth signal to the alarm input of the
external alarm system. The external alarm system immediately triggers an external alarm
using the vehicle indicators and the vehicle horn or the siren.
To interrupt the internal alarm, press the button (8 4, page 5).
To deactivate the external alarm, press
The top button (MS-620) on the alarm system remote control or
The blue button (MS-650)
10
Alarm
If an alarm is signalled, proceed as follows:
Determine the cause of the alarm immediately.
Instruct children and anybody still asleep to leave the vehicle or boat.
Open all doors and windows as quickly as possible.
Avoid striking matches or any naked flames and turn off any sources of combustion
immediately.
Turn off all gas-powered devices.
Avoid causing sparks (do not use any electrical switches).
Rectify the cause or leave the vehicle or the boat.
False alarm
For your safety, the gas detector is very sensitive. For this reason the sensor also reacts
to other gaseous media. Using aerosols (e.g. propellants in spray cans) or thick tobacco
smoke, heavy alcohol fumes or steam arising from cooking can trigger an alarm even
though no gas or anaesthetic gas is present.
26
MagicSafe MSG150

Publicidad

Tabla de contenido
loading

Tabla de contenido