Product Breakdown; Health And Safety - Sagola Turbo 3000 Pro Manual De Instrucciones, Lista De Repuestos

Turbina
Ocultar thumbs Ver también para Turbo 3000 Pro:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

This drawing is not the bill of materials.
10
02
01
08
06
Cod.
01
86464413
02
84260076
03
84260077
04
52410018
Never point the jet of the unit towards yourself, other
people or animals. The solvents and spray devices used
can cause serious injury.
If the product is sprayed or splashed in the eyes it can
cause serious injury.
Never attempt to stop the application stream or a leak
with your hand or any other part of your body.
The premises where work is carried out must have
sufficient ventilation in accordance with current legislation
and regulations. Near the unit, only keep the amount of
product and solvent required for the job being done at that
time. After the job has been completed, the surplus
solvents and product to be applied must be returned to
their specific storage location. Keep the working area
clean and free of potentially dangerous waste (solvents,
rags, etc. ).
While work is in progress, there must not be any source of
ignition (naked flames, lighted cigarettes, etc.) in the
working area as these might generate easily flammable
gases. Similarly, type approved work hazard protection

13. PRODUCT BREAKDOWN

11
09
04
12
U.
Cod.
1
05
56418597
1
06
55710510
1
07
56418594
1
08
84260854

14. HEALTH AND SAFETY

turbo
03
07
U.
Cod.
U.
1
09
52350308
1
1
10
87560023
1
4
11
30060002
1
1
12
56418586
1
means must be used (for breathing, hearing, etc.) in
accordance with current legislation.
If the unit is used in an inadequate manner or its compo-
nents are altered in any way, severe material damage
may occur and bodily harm may be caused to the opera-
tor, other personnel and/or animals and may even cause
death.
SAGOLA, S.A. accepts no liability for any damages
caused by the incorrect use of the equipment.
The moving parts may cause serious injury. Keep tour
distance from these when starting up the equipment or
when using it.
Always use type approved breathing equipment in
compliance current Standards and Regulations in order to
protect yourself from emissions produced during applica-
tion.
As a general preventive measure, we advise you to wear
protective goggles in accordance with the specific
environmental regulations and features of the work
centre.
-13-
PRO
SAGOLA 455
13
05
1 ø 1.40 (Std.)
2 ø 1.00
3 ø 1.20
4 ø 1.80
5 ø 2.20
Cod.
U.
13/1
10110501
1
13/2
10110502
1
13/3
10110503
1
13/4
10110505
1
13/5
10110506
1

Publicidad

Tabla de contenido
loading

Tabla de contenido