User's instructions, Snack maker
AGL9
Use
1.
Grease the tray with butter, margarine or cooking oil.
2.
Plug the unit into the power supply socket.
3.
Depending on the kind of food to heat/cook, choose one of the cooking selections.
Then, turn the timer knob to choose the required time. The heating elements will
not turn on until you have selected the cooking time. The pilot lightilluminates.
4.
Your new snack maker has 3 cooking selections:tal spatula, knife or fork. These
will damage the non-stick coating.
Position Control Switch
OFF
5.
When the timer stops, a bell will ring.
6.
If you want to stop before the selected time is over, place the function selector in
"OFF" position.
7.
Carefully open the door, preferably using an oven glove.
8.
Turn the snack maker off and plug the unit out the power supply socket.
Cleaning and maintenance
Clean the appliance every time after use.
1.
Remove the plug from the wall socket and allow the appliance to cool down
completely.
2.
Use warm water with a small amount of washing-up liquid to clean the baking tray.
Rinse the items with plenty of water and dry them thoroughly.
3.
Use a damp cloth to clean the grille, fat and crumb tray, interior and exterior of the
snack maker and the door. Dry them thoroughly.
4.
Place all the items back in the snack maker and store the snack maker.
PLEASE NOTE
•
Make sure the plug has been removed from the plug socket before cleaning the
appliance.
•
Never use corrosive or scouring cleaning agents or sharp objects (such as knives
or hard brushes) to clean the appliance.
•
Never immerse the appliance, the power cord or the plug in water or any other
fluid
Technical information
Type:
Output:
Power supply:
EN
v 090727-07
Settings
Off
Top heat
Bottom heat
Top and bottom heat
AGL9
600W
230V ~ 50Hz
22