Descargar Imprimir esta página

Terraillon GP3000 Manual Del Usuario página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
AUTOMATIC ELECTRONIC BATHROOM SCALE
Dear Customer,
Thank you for purchasing this product.
Please read these instructions carefully to
take full advantage of your product.
READ BEFORE USE
• Do not disassemble the scale as incorrect
handling may cause injury.
• This product is not intended for professional
or medical use; it is intended for private
use only.
• Clean with a lightly dampened cloth
without allowing any water to get into the
device. Do not use solvents or immerse the
product.
• Avoid excessive impact or vibration to the
unit, such as dropping the product onto
the floor.
• Important: if the appliance is moved
before weighing or between two weighing
sessions,
reinitialize
"Initialisation").
• Remove the battery(s) if the product is not
in use for an extended period.
PRODUCT USAGE
Initialisation
• Insert
the
battery(s)
compartment,
making
polarities are correct, and/or pull the
plastic tape to initialise the batteries for
the first time.
• The LCD will fully display for 5 seconds then
turn off.
• The scale needs to be initialised at the first
time of use, each time it has been moved
or after battery replacement. Press briefly
and sharply with your foot in the middle of
the platform. The display reads « 0.0 ». Your
scale is now is now ready for use.
• If your scale has a conversion switch, you
can change the measuring units from
metric to imperial or vice versa ( i.e. kg / lb)
by simply adjusting the conversion switch
located on the under-side of the scale.
Operation
• Step directly on the scale, and the product
will automatically power on for weight
measurement.
the
scale
(See
in
the
battery
sure
that
the
• Keep as still as possible. The LCD display
will flash 3 times and show your weight.
Indicated weight keeps displaying about
15 seconds when you stand on the scale.
If step off the scale, weight on the display
will disappear after 5 seconds to conserve
the battery power.
Reminder function setting
(alarm after 24 hours)
Turn-on setting: press the button (24H/
Alarm), an alarm icon
It will beep at the same time the next day
reminding you to measure weight.
Turn-off setting: press the (24H/Alarm) button
again, and the alarm icon
on LCD.
When it beeps, just step on the scale to
stop the beep sound. If you do not step
on scale when beeping, the beep sound
will automatically shut off after about 25
seconds.
Warning indicators
------: overloading. Step off the scale.
Lo: low Battery. Replace batteries.
Indicator not returning to Zero:
reset Product. Remove the battery and then
insert.
PROTECT THE ENVIRONMENT
Dispose of used batteries in a designed
container so that they can be collected
and recycled. Do not mix different types of
batteries. Do not mix new and used batteries.
After life, dispose of this product at a
designated waste recycling point.
GUARANTEE
This product is guaranteed against defects
in materials or manufacturing. During the
guarantee period, any such defects will be
repaired free of charge (proof of purchase
must be shown in the case of a complaint
under guarantee). The guarantee does not
cover damage resulting from improper use
or negligence. In the event of a claim, first
contact the shop where you purchased the
product.
EN
will display on LCD.
will disappear
5

Publicidad

loading