Publicidad
Idiomas disponibles
Idiomas disponibles
Flatwasher Locknut
Chute
Snow Chute Flange
e Bolts
4" CHECKLIST
Before you operate your new snow
thrower,
to ensure that you receive the
best performance and satisfaction from this
quality product, please review the following
checklist:
,f
,#
All assembly instructions have been
completed.
The discharge chute rotates freely.
No remaining loose parts in carton,
except for extra shear bolt assembly
parts. Keep in safe place for replace-
ment.
While learning how to use your snow
thrower, pay extra attention to the following
important items:
_',f
Engine oil is at proper level.
,#/
Make sure gas tank is filled properly
with clean, fresh, unleaded gasoline.
_'#" Become familiar with all controls-their
location and function. Operate controls
before starting engine.
Auger Drive Lever - Starts and stops the
auger and impeller (snow gathering and
throwing).
Traction Drive Lever - Propels the snow
thrower forward and in reverse.
Speed Shifter Lever - Selects the speed of
snow thrower (6 speeds forward and 2
speeds reverse),
Crank Assembly-
Changes the direction of
snow throwing through the discharge chute.
Chute Deflector - Changes the distance
the snow is thrown,
Discharge Chute - Changes the direction
the snow is thrown.
Height Adjust Skids - Adjusts the ground
clearance of the auger housing,
Ignition Key-
Must be inserted to start the
engine.
Recoil Starter Handle - Starts the engine
manually.
Choke Control - Used to start a cold en-
gine.
Primer Button - Injects fuel directly into the
carburetor manifold for fast starts in cold
weather.
Throttle
Control - Controls the engine
speed.
Electric Starter Button - Used to start the
engine using the 120 V electric starter.
Shear Bolt -, Shear bolts are designed to
break (to protect the machine) if an object
becomes lodged in the auger housing. Use
of a harder bolt wiU destroy the protection
provided by the shear boll
Publicidad
