Installation Instructions; Step 1- Determine Whether Your Tv Has A Flat, Irregular, Or Obstructed Back - Dynex DX-DTVMFP23 Guia De Instalacion

Installation instructions

STEP 1- Determine whether your TV has a flat, irregular, or
obstructed back
Carefully place your TV screen face-down on a cushioned, clean surface to protect
1
the screen from damages and scratches.
If your TV has a table-top stand attached, remove the stand. See the
2
documentation that came with your TV for instructions.
Lay the TV brackets, oriented vertically, on the back of your TV.
3
Align the screw holes in the TV brackets with the mounting screw holes on your TV.
4
Identify which type of back your TV has:
5
• Flat back: The brackets lay flush against the back of your TV and do not block any
jacks. You do not need spacers when assembling the wall mount.
• Obstructed back: The brackets block one or more of the jacks on the back of your
TV. You need spacers when assembling the wall mount.
• Irregularly-shaped back: There is a gap between a bracket and some part of the
back of your TV. You need spacers when assembling the wall mount.
Remove the TV brackets.
6
www.dynexproducts.com
DX-DTVMFP23
7