Conceptronic CM3S Manual Del Usuario página 30

ENGLISH
The CM3S does not display all HDD partitions / content:
• The partition on the HDD is not primary. Re-partition the HDD again and make sure all partitions are set
to primary.
• The partition is not FAT32 formatted. Re-format the partition with FAT32 File system.
• There are no media files on the selected partition.
The DVD playback does not start when the Play/Pause button is pressed:
• Make sure you use the correct folder structure. The folder structure is described in chapter 8.1.
The DVD Files are incomplete, corrupt or damaged. When this happens, the CM3S does not start DVD
playback.
During the intro-movies of the DVD, the screen goes blank:
• The current chapter ends with a blank screen or is too short to playback. Press the 'Next' (23) button to
switch to the next chapter.
My TV shows a black/white picture instead of color:
• Your TV cannot handle the "Multi" TV-System of the CM3S. Use the Setup menu to change the TV System
to PAL. (See chapter 9). After changing the TV System, turn off and on the CM3S.
30