Where to place the carbon monoxide detector:
Ideally, install a carbon monoxide alarm in:
Every room containing a fuel burning appliance
Remote rooms where occupants spend a considerable amount of time
Every bedroom
However, if the number of carbon monoxide alarms to be fitted is limited, consider the
following points when deciding where best to fit the alarm(s):
If there is an appliance in a room where people sleep, place a CO alarm in this room
Locate an alarm in a room where the occupant(s) spend most of their time (e.g.
sitting room)
In a bedsit, place the CO alarm as far away from the cooking appliance as possible,
but near to where the person sleeps
Caution
Do not mount the cover on the base when the switch
is in the X position. Ensure the switch is in the OK
position.
The CO8M batteries are not replaceable; the product
is powered for life.
When the unit has completed 6 years of operation
the amber light will flash three times every 50
seconds and beep simultaneously. This indicates
that the alarm has reached its end-of-life date and
must be replaced. This date is written on the
product.
How to install
1.
Remove the mounting plate from the packaging and
the protective carton.
800-19461-C
10/2018
The Honeywell Home trademark is used under license from Honeywell International Inc.
Resideo Confidential. © 2018 Resideo Technologies, Inc. All rights reserved.
20