Indoor Siren - resideo Le Sucre Manual Del Usuario

Indoor siren

Installation requirements
Install the siren:

Away from any source of electrical interference

On a ceiling or as high as possible on a wall

Centrally, within the protected premises
How to install
1. Remove the cover.
2. Position the siren base plate against the wall and mark the
3 securing holes.
3. Drill the holes, insert the screw anchors, and then screw
on the base plate.
4. Pull out the battery tab to power up the sensor.
5. Press the black button on the PCB. You will hear 2 short
beeps from the Badge reader and the siren.
6. Locate the cover onto the tab (1) on the base, and then
turn to the other side (2).
800-19461-C
10/2018
The Honeywell Home trademark is used under license from Honeywell International Inc.
Resideo Confidential. © 2018 Resideo Technologies, Inc. All rights reserved.
24