Product Setup - D-Link DCS-2330L Guía De Instalación Rápida

PRODUCT SETUP

ZERO CONFIGURATION SETUP
If you have a D-Link Cloud Router, you can take advantage of Zero Configuration Setup. This
feature automatically configures your camera's settings for you and adds it to your mydlink account.
If you do not have a D-Link Cloud Router, you can use the Setup Wizard to install and configure your
camera, as described in the following section.
DCS-2330L
USING THE INSTALLATION WIZARD
If you do not have a D-Link Cloud Router, you can simply use any Windows or Mac computer to
go through the Installation Wizard from the CD, which will guide you through the installation process
from connecting your hardware to configuring your camera.
If you do not have a CD-ROM drive, or the CD is missing, please download the Setup Wizard from
http://www.mydlink.com/support
2
Step 1:
Carefully remove the rubber seal on the back of the DCS-2330L,
and use the included Ethernet cable to connect the DCS-2330L to
your network.
Step 2:
Attach the external power supply to your wall outlet or power strip.
Power is confirmed when the green LED Power Indicator located
below the lens is lit.
Step 3:
From any computer, open a web browser, go to
http://www.mydlink.com and log in to your account. Click on the
device name when the new device notification appears to add the
camera to your account. If you wish to connect your camera to your
router with a wireless connection, you can simply disconnect the
Ethernet cable and move the camera to its intended location.
• Windows Users: Insert the CD. Simply click Set up your Cloud
Camera to go through the Setup Wizard. If the Setup Wizard
program does not automatically start on your computer, go to Start
> Run. In the run box type D:\autorun.exe (where D: represents the
drive letter of your CD-ROM drive) and click OK.
• Mac Users: Insert the CD. On the desktop, open your CD drive,
and double-click on the SetupWizard file. Wait about 20-30
seconds, and follow the instructions on screen.
DCS-2330L