14
CHECK THE HEIGHT OF HARNESS
3
Always check whether the Y-shaped belts are at the correct height for your child. If
not , repeat adjusting the height of headrest .
If the height of Y-shaped belt is not in accordance with requirement, please adjust
according to the following steps:
Step1: Press the red button of buckle, two pieces of buckle will eject automatically
Step2: Press the seat belt adjustment button to change the position of shoulder
Y-shaped belts .
EN
ADJUST AND USE THE Y-SHAPED BELTS
4
· Loosen the Y-shaped belts
The Y-shaped belts can be slackened by pressing the adjuster(under the seat cover).
Press the adjuster as you grip the two Y-shaped belts with your another hand.Pull
the Y-shaped belt towards you to loosen the Y-shaped belts.
· Tighten the Y-shaped belts
Pull the front upwards until the Y-shaped belt is fully tightened.The Y-shaped
belt should be adjusted tightly without causing discomfort to your child.A loose
Y-shaped belt can be dangerous.
Check the Y-shaped belt adjuster and tighten it each time when the child is placed
in the seat.
Seat belt adjustment
button