Stihl TSA 230 Manual De Instrucciones página 20

English
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools
with sharp cutting edges are less
likely to bind and are easier to
control.
g) Use the power tool, accessories
and tool bits etc. in accordance with
these instructions, taking into
account the working conditions and
the work to be performed. Use of the
power tool for operations different
from those intended could result in a
hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type
of battery pack may create a risk of
fire when used with another battery
pack.
b) Use power tools only with
specifically designated battery
packs. Use of any other battery
packs may create a risk of injury and
fire.
18
c) When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal to
another. Shorting the battery
terminals together may cause burns
or a fire.
d) Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from
the battery may cause irritation or
burns.
6) Service
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
7) Safety instructions for abrasive
cutting-off operations
Cut-off machine safety warnings
a) The guard provided with the tool
must be securely attached to the
power tool and positioned for
maximum safety, so the least
amount of wheel is exposed
towards the operator. Position
yourself and bystanders away from
the plane of the rotating wheel. The
guard helps to protect operator from
broken wheel fragments and
accidental contact with wheel.
b) Use only bonded reinforced or
diamond cut-off wheels for your
power tool. Just because an
accessory can be attached to your
power tool, it does not assure safe
operation.
c) The rated speed of the accessory
must be at least equal to the
maximum speed marked on the
power tool. Accessories running
faster than their rated speed can
break and fly apart.
d) Wheels must be used only for
recommended applications. For
example: do not grind with the side
of cut-off wheel. Abrasive cut-off
wheels are intended for peripheral
grinding, side forces applied to
these wheels may cause them to
shatter.
e) Always use undamaged wheel
flanges that are of correct diameter
for your selected wheel. Proper
wheel flanges support the wheel
thus reducing the possibility of
wheel breakage.
f) Do not use worn down reinforced
wheels from larger power tools.
Wheels intended for a larger power
tool are not suitable for the higher
speed of a smaller tool and may
burst.
TSA 230