Publicidad
Idiomas disponibles
Idiomas disponibles
6
|
operaTing insTruCTions
While the battery is on the charger, connect the base charger to
a power source . The LCd panel will light up . The LCd's charge
indicator bars will begin to appear to show the battery charge
level . The bars will begin to blink at start of each charging level .
Less than 25% capacity the 1st (25%) bar will blink .
Less than 50% capacity the 2nd (50%) bar will blink .
Less than 75% capacity the 3rd (75%) bar will blink .
Less than 100% capacity the 4th (100%) bar will blink .
When the battery is fully charged, all four bars will light but stop
blinking, and a beeping alarm will sound . after 75 seconds, the
LCd will turn off . (Typical charge time is 1-hour for batteries up to
900mah .)
noTe:
The charger or battery may become warm when charging, this is
normal .
mainTenanCe:
remove from power outlet before cleaning . use a clean, dry
cloth when necessary to keep the metal contacts of both charger
and battery clean .
Publicidad
